Demonstration data — every project, requirement, measurement and person shown here is synthetic. Nothing on this site is a real R&D record.
Formula FRM-009 · FRM-009-V001
High-Build Polyester Primer
SUBMITTABLESuccessful
- Project
- RDP-2026-009
- Family
- Primers
- Owner
- Ama Chemist
- Version
- FRM-009-V001 (submitted)
- Created
- 2026-08-11 by Ama Chemist
- Approved
- —
Theoretical density
1.5414 g/cm³
Volume-additive. CALCULATED, never measured — see the observed effect below.
View the records behind Theoretical densitySolids
85.30%
Non-volatile content by mass.
View the records behind SolidsVOC
226.6 g/L
Per litre, because that is the unit regulators use.
View the records behind VOCRaw material cost
2.5968 / kg
Raw material only — excludes labour, energy, packaging and yield loss.
View the records behind Raw material costVersion genealogy
Revisions are additive. An approved formula is never edited in place — §8 — so the history below is the whole record of how this formula reached its current composition, including the branches that failed.
Composition — FRM-009-V001
Percentages are mass percent. The weigh-up column is a 25 kg batch scaled by the engine, and the component masses sum exactly to the batch mass — rounding each line independently would drift, and a technician reconciling the sheet would find a discrepancy the software invented.
| Code | Material | % | 25 kg batch |
|---|---|---|---|
| RM-RES-01 | Unsaturated Polyester Resin (orthophthalic) | 42.00 | 10.500 kg |
| RM-FIL-02 | Talc (platy) | 26.00 | 6.500 kg |
| RM-FIL-01 | Calcium Carbonate (fine ground) | 12.00 | 3.000 kg |
| RM-PIG-01 | Titanium Dioxide (rutile) | 4.00 | 1.000 kg |
| RM-ADD-01 | Fumed Silica (hydrophobic) | 4.00 | 1.000 kg |
| RM-CAT-01 | BPO Hardener Paste (50%) | 12.00 | 3.000 kg |
| Total | 100.0000 | 25 kg | |