Demonstration data — every project, requirement, measurement and person shown here is synthetic. Nothing on this site is a real R&D record.

Formula FRM-014 · FRM-014-V004

Premium Lightweight Automotive Putty

SUBMITTABLE

Project: RDP-2026-014
Family: Polyester Fillers
Owner: Ama Chemist
Version: FRM-014-V004 (approved)
Created: 2026-07-02 by Ama Chemist
Approved: 2026-07-08 by Esi Lead

Theoretical density

1.0924 g/cm³

Volume-additive. CALCULATED, never measured — see the observed effect below.

Solids

91.64%

Non-volatile content by mass.

VOC

91.3 g/L

Per litre, because that is the unit regulators use.

Raw material cost

3.9407 / kg

Raw material only — excludes labour, energy, packaging and yield loss.

Version genealogy

Revisions are additive. An approved formula is never edited in place — §8 — so the history below is the whole record of how this formula reached its current composition, including the branches that failed.

Composition — FRM-014-V004

Percentages are mass percent. The weigh-up column is a 25 kg batch scaled by the engine, and the component masses sum exactly to the batch mass — rounding each line independently would drift, and a technician reconciling the sheet would find a discrepancy the software invented.

Composition of FRM-014-V004 with a 25 kg weigh-up
Code	Material	%	25 kg batch
RM-RES-02	Low-Styrene Polyester Resin	38.00	9.500 kg
RM-FIL-01	Calcium Carbonate (fine ground)	22.00	5.500 kg
RM-FIL-03	Glass Microspheres (hollow)	12.50	3.125 kg
RM-FIL-02	Talc (platy)	8.00	2.000 kg
RM-PIG-01	Titanium Dioxide (rutile)	3.00	0.750 kg
RM-ADD-01	Fumed Silica (hydrophobic)	2.50	0.625 kg
RM-ADD-02	Silane Coupling Agent	1.00	0.250 kg
RM-CAT-01	BPO Hardener Paste (50%)	13.00	3.250 kg
Total		100.0000	25 kg

Difference from FRM-014-V003

Old, new, absolute change and percentage change per component — all computed by the engine. A component present in one version and absent from the other shows an empty cell, not a zero: zero means none was used, empty means the line did not exist.

Component differences from the parent version
Material	Change	Old %	New %	Δ	%Δ
RM-FIL-01 Calcium Carbonate (fine ground)	changed	24.0000	22.0000	-2.0000	-8.33%
RM-FIL-02 Talc (platy)	changed	8.5000	8.0000	-0.5000	-5.88%
RM-FIL-03 Glass Microspheres (hollow)	changed	10.0000	12.5000	2.5000	25.00%